Jun 08, 2025

What Are The Cost Drivers Of Investment Casting?

Leave a message

Investment casting (lost wax casting) is a high-precision casting process whose cost is affected by multiple factors. Customers face different choices when manufacturing parts. Which process to choose usually depends on manufacturing capabilities, product feasibility and cost. When evaluating the cost of investment casting, the cost of different customers may vary due to their specific manufacturing needs (such as the number of parts required). However, there are several key cost drivers to consider when deciding on manufacturing technology.

 

The following analyzes the core cost drivers from the dimensions of materials, design, process, equipment, etc., and attaches cost optimization directions:

 

1. Material selection


The selected metal is a cost driver for investment casting. Base metals and alloys vary in grades. Therefore, even if the same metal is used, a higher purity alloy will cost more than a lower grade alloy. Customers also need to purchase more metal than they actually need to cast the part. Other cost factors include rarity and availability. Metals that are difficult to mine and process will limit their supply, as this factor may increase costs.

The following are the specific material costs


1.1 Wax mold materials

 

Types and prices:
Common wax materials include paraffin-stearic acid-based wax (low cost), medium-temperature mold materials (such as polyethylene wax, high precision but 2-3 times more expensive), and high-temperature mold materials (such as ceramic mold materials, used for complex structures, the highest cost).
The price of imported high-performance wax materials can reach 1.5-2 times that of domestic materials.
Loss rate: Wax mold repair and wax recycling will cause 5%-15% material loss, and complex castings will have higher losses.


1.2. Shell materials


Refractory materials:
The price of surface materials (such as zircon sand and corundum) is 3-5 times that of backing materials (such as silica sand). High-alloy steel castings require special materials such as yttrium oxide, and the cost has increased sharply.
Binders (such as water glass, silica sol): Silica sol has high strength but is 4-6 times more expensive than water glass, and the drying time is long, which affects efficiency.
Consumption quota: The material consumption of multi-layer shells (usually 5-10 layers) increases with the size and complexity of the casting. The material cost of the shell for large parts can account for 20%-30% of the total cost.


1.3. Metal materials


Alloy types:
Stainless steel and high-temperature alloys (such as nickel-based alloys) are 3-10 times more expensive than ordinary carbon steel, and precious metals (such as titanium alloys and cobalt-chromium alloys) are more expensive.
Smelting loss: The precision casting melting yield is about 70%-85%, and the loss cost of rare alloys is significant.

 

2. Design complexity

 

The design of the part is an important factor affecting the cost of investment casting. Simple part designs without internal channels, holes or other features help reduce customer costs. However, when the part has a more complex geometry and requires a complex core design, these features require the pouring system to ensure that the molten metal reaches all necessary areas to obtain a high-quality and defect-free product. This additional work may increase production costs.

Complex components and large parts may also require additional shells. These additional shells can enhance the strength of already fragile walls (such as elongated holes or slots). Due to the additional shells and complex designs, the drying process may take longer, slowing down production. All of these factors will increase project costs.

 

 

news-727-545

3. Production process, heat treatment, surface treatment and testing requirements

 

3.1. Mold development


Mold complexity:
Single-piece small batch production requires hand-carved wax molds, which are low cost but low efficiency; batch production requires metal molds (such as aluminum molds, steel molds), and mold development costs can reach tens of thousands to hundreds of thousands of yuan, accounting for 30%-50% of the initial cost.
Mold life: Aluminum alloy molds produce about 500-1000 pieces, and steel molds can reach tens of thousands of pieces. Frequent mold replacement increases the cost of sharing.

 

3.2. Process complexity


Wax mold production:
Complex castings (such as aviation blades and turbine impellers) require multi-module wax molds, and manual assembly time is long, accounting for 15%-25% of the labor cost.
Shell preparation:
Silica sol shell needs to be coated and dried multiple times (each layer takes 12-24 hours to dry), with a cycle of up to 5-7 days, and high energy consumption (such as constant temperature and humidity workshop) and labor costs.
Dewaxing and roasting:
Steam dewaxing consumes about 500-800kJ/kg wax, and the power of electric roasting furnace reaches hundreds of kilowatts, and energy costs account for about 10%-15%.

 

3.3. Post-processing


Sand cleaning and surface treatment:
High-pressure water cleaning, sandblasting and other processes increase working hours; precision parts require chemical polishing or electrolytic polishing, and the cost of materials and equipment is high.
Testing costs:
Non-destructive testing costs such as penetrant testing, X-ray testing, and three-coordinate measurement account for 5%-10% of the total cost, and are higher in high-demand fields such as aerospace.

Each manufacturer has its own production processes and technologies specific to its operations and services. These prices vary according to their capabilities. They may also provide certain technologies to help customers create cost-effective solutions.

Rapid prototyping services, heat treatments, surface treatments, and various testing requirements can increase the cost of your part. These are optional services that can improve part quality and ensure the part will perform as required by the application. Many customers choose these surface treatment services because they know the upfront investment will be worth it for the long-term return on investment.

Send Inquiry