Auto parts casting is a production method in which molten metal is poured into the mold cavity and cooled and solidified to obtain the product. In the automobile manufacturing process, there are many auto parts made of cast iron, accounting for about 10% of the total weight of the car, such as cylinder block, gearbox, steering gear housing, rear axle housing, brake drum, various brackets, etc.
In the silica sol castings of auto parts, we can use stainless steel, carbon steel, carbon steel, etc., all of which can be used for precision casting. But in practice, it still depends on the specific situation to select.
Cylinder body silica sol stainless steel casting, which can be generally referred to as precision casting, is a special casting method. Generally speaking, the parts obtained by precision casting do not need to be machined anymore, because it can obtain a more precise shape and a higher casting accuracy. However, we can also perform heat treatment and cold drawing on it according to product needs. The types of precision casting mainly include investment casting, pressure casting, etc.
Sand molds are generally used to make cast iron parts. The raw materials of sand molds are mainly sand, mixed with binder and water. The sand mold material must have a certain bonding strength to be formed into the required shape and resist the scouring of hot metal without collapsing. In order to mold the cavity in the sand mold according to the shape of the casting, it is necessary to make a mold with wood, which is called a wooden mold. The volume of the hot molten iron will shrink after cooling. Therefore, the size of the wooden mold needs to be increased according to the shrinkage rate based on the original size of the casting, and the surface to be processed will also be thickened accordingly.
Hollow castings need to be made into sand cores and corresponding core wood molds (core boxes). With a wooden mold, the cavity sand mold can be turned over (casting is also called "turning sand"). When making sand molds, it is necessary to consider how to separate the upper and lower sand boxes to take out the wooden mold, the molten iron flows into the wooden mold, and how to fill the mold cavity to obtain high-quality castings. After the sand mold is made, it can be poured, that is, the molten iron is poured into the cavity of the sand mold. During pouring, the temperature of the molten iron is 1250-1350℃, and the temperature is higher during melting.
Auto parts forging is widely used in automobile manufacturing. Forging is divided into free forging and die forging. Free forging is a processing method in which a metal blank is placed on an anvil to withstand impact or pressure (called "forging"). The blanks of automobile gears and shafts are processed by free forging.
Die forging is a processing method in which a metal blank is placed in the die cavity of a forging die and subjected to impact or pressure. Die forging is a bit like the process in which dough is pressed into a cookie shape in a die. Compared with free forging, the workpiece manufactured by die forging has a more complex shape and more accurate size. Typical examples of automotive die forgings are: engine connecting rods and crankshafts, automobile front axles, steering knuckles, etc.
When choosing a custom precision investment casting manufacturer, you need to consider its process capabilities, material range, quality control and service level. Ningbo Suijin Machinery Technology Co., Ltd. can provide custom precision investment casting services. We focus on providing customers with high-precision, complex-shaped metal parts manufacturing services. Investment casting (also known as lost wax casting) is a precision casting process that can produce parts with precise dimensions and high surface finish. It is widely used in aerospace, automotive, medical, energy and other fields.




